How to handle chemical spills in laboratories？

作者：

 

Sometimes, chemical leakage will occur in the laboratory. If it is not handled properly, the chemical leakage may cause serious damage and, in worse cases, damage or injury. Most leaks will involve a small amount of known substances, and the risk of cleaning up these substances will be low if appropriate measures are taken. For some liquid leakage, the most convenient method is to use chemical absorbent pad to adsorb the leaked liquid chemicals. In order to meet this demand, the performance requirements of chemical sorbent pad are. Firstly, the adsorption effect of chemical absorb pad must be absorbed quickly, and secondly, chemical absorber pad must be corrosion-resistant. Finally, chemical absorbing pad does not produce secondary overflow in the adsorption process, which requires that the adsorption capacity of chemical absorbent pads must be large. At the same time, when dealing with the leakage of chemical liquid, operators should pay attention to their own safety and do a good job in relevant protection. After handling the chemical liquid leakage accident, the used chemical sorbent pads shall be handled in time according to relevant regulations to prevent secondary pollution.

Here is the content list:

●What is chemical absorbent pads?

●Characteristics of chemical absorbent pads.

●Brief introduction of production technology of chemical absorbent pads.

●Brief introduction of chemical absorbent pads.

What is chemical absorbent pads?

1. chemical absorbent pad is also called chemical absorbent cotton and chemical acid absorbent pads.

2. Chemical absorbent pads has large adsorption capacity (10 to 20 times of self weight).

3. Chemical sorbent pad absorbs fast (in minutes).

4. Chemical sorbent pads is clean, light and fast.

5. After absorbing the leaked liquid, the chemical absorb pad can be reused after extrusion to save money.

6. Chemical absorb pads is not prone to chemical reaction (chemical resistance).

7. Chemical absorber pad will not deteriorate, safe and environmental protection, no combustion support, no decay or mildew.

8. Chemical absorber pads can be incinerated or mixed with fuel, and only 0.02% of ash is incinerated at high temperature.

Characteristics of chemical absorbent pads

●Chemical absorbing pad is an economical universal adsorption product. Chemical absorbing pads has the appearance, feel and performance of advanced products.

●Chemical absorbent pad can absorb almost all liquids (water, petroleum, chemical based liquids).

●Chemical absorbent padS is made of brand-new 100% melt blown polypropylene.

●
Chemical sorbent pad high-efficiency single-layer structure.

●Chemical sorbent pads is produced by special surface technology, which improves the adsorption capacity and strength without increasing the weight.

●Chemical absorb pad surface treatment to increase durability and reduce fiber chips.

●the chemical absorb pads can be used as a virtual tangent as required, which helps users tear it off for use according to the required amount, so as to reduce waste.

Brief introduction of production technology of chemical absorbent pads

Chemical absorber pad is made of new 100% polypropylene melt blown fiber and non-woven fabric. The technological process of chemical absorber pads is: melt blown non-woven fabric: polypropylene particle feeding - melt extrusion - fiber formation - fiber cooling - netting on the spinning board - reinforcement into cloth.

Brief introduction of chemical absorbent pads

●Chemical absorbing pad is a special absorbent material for absorbing chemical liquids. Chemical absorbing pads is suitable for the field of environmental protection. After inert and anti-corrosion treatment and active treatment on the surface, the chemical absorbent pads can absorb 15 times its own weight of liquid.

●Chemical absorbent pad is universal and low-cost. It can adsorb chemicals including hydrofluoric acid. It can quickly reduce the problems caused by the overflow of harmful substances.

●Chemical sorbent pad is chemically inert, so it will not react with aggressive liquids. Chemical sorbent pads can absorb oil, acid, alkali, chemicals, coolant, antifreeze and other chemical liquids. Chemical sorbent pad is a necessary material for emergency treatment in all kinds of chemical production enterprises, dangerous goods storage, transportation and laboratory to prevent all kinds of liquid leakage.

Contact Us

Suzhou Hopetopway New Material Co., Ltd. has been engaged in safetyprot products for many years. Hopetopway has a strong R&D team. Hopetopway also has modern factories with multiple production lines. And a large number of meticulous quality control personnel. Provide global customers with high-quality safetyprot products. Our goal is: Safetyprot Is Hopetopway.

●Contact: Roy Yu

●Mobile number: 086 159 0068 2043

●Tel: 86 0512 6679 1900

●Email: roy.yu@nonwoven86.com

●Website: https://www.nonwoven86.com

评论

发表评论

此博客中的热门博文

what is a spill pallet?

作者：
  what is a spill pallet? In recent years, with the improvement of the national and people's demand for the quality of living environment, the national requirements for enterprise environmental protection have gradually increased, especially in the chemical industry. There are many ways to solve the environmental protection problems in the chemical industry, and we can't explore them, but the common problems of raw materials and oil leakage are the persistent diseases we often encounter. For this, a product called Spill Containment Pallet came into being. Spill Pallet, also known as Spill Tray, Spill Pallet, leakage pallet,spill pallet ramp, oil bucket kit, spill workstation, oil spill pallet ramp, oil bucket kit and spill containment workstation, It is a polyethylene container designed and developed to prevent and control the leakage of oil barrels, chemical barrels and other oil and chemical containers widely used in modern factories, warehousing, logistics and transportation
Read more »

What is floating booms?

作者：
  The solid float welded   PVC oil containment boom   is a universal horizontal foam solid float high-strength double-sided plastic coated cloth oil containment boom. It has certain wind wave resistance and oil retention capacity, is durable, easy to use, easy to clean and repair, etc. the most prominent advantage is that there is no water inside the oil containment boom, so the cloth is very light to put in and recover. It is suitable for manual placement, which is suitable for both long-term placement in water and emergency placement. In addition to intercepting and guiding oil spills, it can also be used for intercepting some chemical liquids floating on the water surface, cleaning garbage and other floating objects on the water surface and protecting specific water areas. In addition to intercepting the spilled oil, the hopetopway oil barrier can also guide the spilled oil and concentrate it as much as possible for further recovery and treatment. Here is the contene list: ● Deploym
Read more »

how are booms used in oil spills？

作者：
On April 20th, 2010, the Deepwater Horizon drilling platform blew out and exploded. After burning for about 36 hours, the drilling rig finally sank in the morning of April 22. The accident resulted in the death of 11 workers and 17 injuries, and at least 560000 tons of crude oil flowed into the Gulf of Mexico, which is recognized as the largest oil spill in industrial history. In order to prevent the further expansion of the oil pollution area, the cleaning workers use physical barriers such as oil containment boom to block the oil pollution. At the same time, they drove the skimmer to clean up most of the oil slick and absorbed the residual oil slick like a sponge with an adhesive. In order to solve the problem of oil spill on the Deepwater Horizon drilling platform, workers put 5.3 million liters of oil chemicals into the oil well. Oiling agents are similar to dishwashing agents, which can effectively decompose oil and dissolve it into water, reducing the erosion of oil on the coastl
Read more »

How should a chemical spill be cleaned up？

作者：
  1. Quickly evacuate the employees in the annex of the leak site and restrict anyone from entering the leak area; 2. Confirm what kind of chemical was leaked under safe conditions, report the incident to the boss and inform the trained personnel of leakage response; Please call the emergency hotline immediately if your organisation has no trained response staff and is in the event of a massive leak, fire or medical assistance; 3. Leave the site immediately if you fail to confirm subsequent treatment procedures and attempt to clean up spilled chemicals at your own risk; 4. Wear personal protective equipment to strengthen personal protection; 5. Maintain good ventilation in the leakage area; 6. Eliminate all combustion sources and incompatible substances of the leakage; 7. Care for workers exposed to chemical spills. Immediately take off the clothes contaminated with chemicals, such as skin chemicals, and gently rinse the contact area with water for at least 15 minutes. 8. Containment m
Read more »

How do you use a chemical spill kit？

作者：
 Take the  Hopetopway Chemical Spill Kit . The chemical spill kit consists of socks, gaskets, pillows and goggles, gloves, and a chemical trash can. The chemical spill kit is contained in a convenient zippered storage bag for easy transportation to and from the spill area and is compact enough to be stored in a van or behind the driver's seat if required. Chemical absorbent cotton is suitable for small areas of chemical liquid leakage, directly covering the liquid. For large area or multi-capacity leakage, adsorption cotton can be used to delineate the leakage range and gradually reduce the leakage range. According to the actual leakage area, the appropriate length of adsorption sliver should be selected, and the contact points at both ends of the sliver should be overlapped to form a strong barrier for leakage. Absorbent cotton pillow is used alone or with absorbent cotton sliver. When used, the operator can directly put the adsorption cotton pillow on a larger area (or has been s
Read more »
作者：
  what is a boom oil spill ? Since the 1960s, oil spills have frequently occurred. After oil spills, sea water pollution has been caused. Oil pollution will also isolate the air exchange between the atmosphere and sea water, and weaken the energy of sunlight penetrating into the sea water, resulting in serious hypoxia in the sea water, weakened photosynthesis of marine plants, unable to grow normally, and the number of marine plankton that feed on it will also decrease, thereby destroying the marine ecological balance. Not only that, after the decomposition of oil, a large number of nitrogen and phosphorus residues will be produced, leading to the eutrophication of sea water. At this time, the algae and plankton in the sea seem to get a delicious look. They greedily eat these nutrients. In the process of feeding, plankton also need a lot of oxygen, but the oxygen in sea water is very limited, so plankton and other marine organisms began to compete for oxygen, Many marine creatures suff
Read more »

How to deal with the leakage of dangerous chemicals?

作者：
  Emergency treatment measures During the production, storage and use of chemicals, containers containing chemicals often have accidents such as accidental rupture and spillage, resulting in the leakage of hazardous chemicals. Whether chemical storage containers or reagent bottles used in laboratories, factory batteries, etc., will leak due to long-term use, or leak due to damage, or spill and splash during the process of sub-packaging, which will pollute the working environment, Impacts on cleaner production. If these chemical spills are not treated or prevented in time, they will pollute the water or soil, not only causing a bad impact on the environment, but also seriously endangering the safety of people's lives and property. Therefore, it is necessary to take simple and effective safety technical measures to eliminate or reduce the risk of leakage. The following describes the emergency measures that must be taken for chemical leakage. · Evacuation and isolation In case of any
Read more »

What chemical spill in new Amsterdam?

作者：
  There have been no immediate reports of a chemical spill in New Amsterdam. But on May 6, 2017, a container containing chemical liquids leaked southeast of the Indian capital, Injuring at least 487 people, including more than 200 students who were hospitalized with eye and throat irritation. And in 2014, a chemical gas leak at a large steel plant in The Indian state of Chhattisgarh killed six workers. Chemical leakage events often happen, if the enterprise has enough safety awareness, with the use of   chemical absorbent pad   when dealing with chemical liquid leakage, accident casualties should be reduced. Hopetopway chemical absorbent pads are specially designed for a variety of working environments and different leaking fluids to provide a guaranteed chemical spill kit for spills that may exist in your workplace. Here is the contene list: ● How about the manufacturing process of chemical absorbent pad? ● What are the advantages of chemical absorbent pad? ● The application of chemic
Read more »

How are oil spills caused?

作者：
  Oil spills can have a devastating impact on the environment and wildlife, as well as on local economies that rely on tourism and fishing. These spills can be caused by a variety of factors, including accidents, natural disasters, and human activities. One common cause of oil spills is accidents involving oil tankers, pipelines, and offshore drilling platforms. These accidents can be caused by a variety of factors, including human error, equipment failure, and extreme weather conditions. For example, a tanker may run aground or collide with another vessel, resulting in the release of oil into the water. Another cause of oil spills is natural disasters, such as hurricanes, earthquakes, and tsunamis, which can damage oil infrastructure and cause spills. These disasters can also trigger landslides and mudslides, which can bury or damage pipelines, leading to spills. Human activities can also contribute to oil spills. For example, illegal dumping of oil and other hazardous substances into
Read more »

Why to use oil absorbent pads？

作者：
  Oil absorbent pad is made of inert chemical polypropylene by melt blowing process. Oil absorbent pad can effectively absorb and retain liquid. The products adsorbed by oil absorbent pad are wrapped in surface treated polypropylene fiber or non-woven fabric. The outer cloth of oil oil absorbent pads is extremely tough and durable, with strong adsorption. The oil absorbent mat can effectively absorb the leakage liquid and prevent the diffusion of the leakage. The oil absorbent sheet can be reused after extrusion, and 72% - 90% of the leakage liquid can be recovered (depending on the manufacturing process and quality of the oil absorbing pad). The advantages of oil absorbing pads are flame retardant, no dust, no storage time limit and so on. Here is the content list: ● Brief introduction of production process of oil absorbent pads. ● Characteristics of absorbent pads. ● Why use oil absorbent pads? Brief introduction of production process of oil absorbent pads The technological process o
Read more »