How do you clean oil spills?
Because water and oil are not mutually soluble, when an oil spill occurs, the oil floats to the surface of the water, forming a thin layer of oil. The oil would spread out and become thinner and thinner, eventually creating a glint on the surface of the vast expanse of water. The speed with which crews can reach the site, as well as other factors such as current and weather, determines what measures they apply to clean up the oil. In fresh water, the densest crude oil sinks. Usually, as the oil breaks down, the heavy oil mixes with water and river sediment to form waste oil clumps. The outer layers of these waste oil blobs tend to harden, while the center remains soft. Because these oily clumps are sparsely dispersed, they and other degraded oil pose less of a threat to the environment than concentrated oil. Oil absorbent pad is made of 100% polypropylene lipophilic superfine fiber nonwoven fabric without chemicals. Oil absorber pad will not cause secondary public hazards, can quickly absorb its weight dozens of times the oil, organic solvents, hydrocarbons, vegetable oil and other liquids.
Here is the contene list:
●Basic description of oil-absorbing pad.
●Oil-absorbing pad production process brief introduction.
●Application range of oil absorbent pad.
●Oil absorption pad industrial cleaning knowledge.
Basic description of oil-absorbing pad.
Oil absorbent mat is made from inert chemical polypropylene by melt-blown process. Oil absorbent pad can effectively absorb liquid and retain it. The adsorbent of oil-absorbing pad is wrapped in the surface treated polypropylene fiber or non-woven fabric, the outer cloth is extremely tough and durable. Oil absorber mat has a strong absorption power, and bring a strong adsorption. Oil absorbent pad absorbs leaking liquid and effectively prevents the spread of leakage. The oil-absorbing pads can be reused after being twisted and extruded, and can recover 72% to 90% of the leaking liquid (depending on the manufacturing process and quality of the oil-absorbing mats). Oil absorbent pad has the advantages of flame retardant, no dust, no storage limit time and so on. The manufacturing process of PP oil-absorbing mat is to first obtain melt-blown polypropylene non-woven fabric, and then make various specifications of oil-absorbing pad.
Oil-absorbing pad production process brief introduction.
The process of polypropylene melt-blown oil-absorbing mat is as follows: polypropylene particle feeding -- melting extrusion -- fiber formation -- fiber cooling -- mesh on spinning board -- reinforcement into cloth.
Application range of oil absorbent pad.
Oil absorb pad is widely used in Marine oil spill emergency treatment and various oil, chemical leakage treatment; It is very suitable for petroleum exploitation, petrochemical industry, shipbuilding, oil port, wharf, machinery and other industrial fields. The difference and use of oil-absorbing pad and linoleum.
Oil absorption pad industrial cleaning knowledge.
1.Oil absorption pads has the characteristics of oil absorption, its oil absorption is ten to twenty-five times its own weight.
2.Oil absorption pad adsorption speed is very fast, even in minutes to calculate.
3. Oil-absorbing pad is buoyant and can be widely used in industrial manufacturing and Marine operations.
4. Oil-absorbing pad can be used again, so it can save a certain amount of money for the company.
5.Oil absorb mat is resistant to chemicals, so it is difficult to react with other chemical supplies.
6.Oil-absorbing pad will not rot, not moldy, at the same time in use is quite safe, and will not produce pollution to the environment.
7.Oil absorption pad after combustion, leaving relatively little residue, reduce the pollution to the environment.
8.The cost of oil absorption mat is very low, but its adsorption capacity is quite high.
评论
发表评论