Why is it hard to clean up oil spills？

 The oil film is too thin or too large to be cleaned. With the wind and waves, the cleanup is even more difficult. If the oil leak site is located deep underwater, flammable ice is easily generated under water depth pressure, and remote control machinery can only be used to construct the seabed, which is technically difficult and the operation time is greatly limited by sea conditions and seabed conditions. If the leak point is on the surface of the sea, combustion cannot be considered. When oil is burned, oxygen is consumed, which blocks oxygen in the water and deprives aquatic life of oxygen. And burning produces carbon dioxide, which is a greenhouse gas and affects the atmosphere. In addition, there are many environmental restrictions on oil spill dispersants, and the main units dealing with oil spill accidents are generally maritime or environmental protection departments. In addition, the use of oil spill dispersants has been controversial, and oil spill dispersants are strictly controlled and restricted. Hopetopway oil absorbent pad is made of 100% polypropylene lipophilic superfine fiber nonwoven fabric, without chemical agents. Oil absorbent mat will not cause secondary public hazards, can quickly absorb its weight dozens of times the oil, organic solvents, hydrocarbons, vegetable oil and other liquids.

Here is the contene list:

● Oil-absorbing mat manufacturing process introduction.

● Why use oil absorbent pad?

● Why are there so many cheap oil absorbers pad on the market?

Oil-absorbing mat manufacturing process introduction.

1.Oil absorber pad is composed of polypropylene melt-blown fiber and non-woven fabric. The process of oil-absorbing pad is as follows: polypropylene particle feeding → melting extrusion → fiber formation → fiber cooling → mesh on the spinning board → reinforcement into cloth.

2.Oil-absorbing pad is also called absorption cotton, industrial absorber pad, sometimes people simply called it oil-absorbing mat.

3.Oil absorber pad can control and absorb petroleum hydrocarbons, various acids (including hydrofluoric acid), non-corrosive liquids and large-scale oil spill accidents at sea. Oil absorb pad is the most commonly used item to deal with leakage after oil leakage.

4 Oil-absorbing pad is a kind of inert polypropylene melt-blown fiber and non-woven fabric made of special treatment, effective adsorption liquid and retain it. The absorbent products are wrapped in surface treated polypropylene fibers or non-woven fabrics. Oil-absorbing mat outer cloth is tough and durable, with strong absorbability. The oil absorbing pad absorbs the leaking liquid to the oil absorbing pad and effectively prevents the leakage from spreading. Oil absorb mat can be reused after being twisted and extruded. Oil sorbent pad can recover 72% to 90% of the leaking fluid (depending on the manufacturing process and quality of the oil absorbent pad). This oil-absorbing pad has the advantages of flame retardant, no dust, no storage limit time, etc.

Why use oil absorbent pad?

● Oil leakage will cause waste of oil, affect the economic benefits of enterprises, but also pollute the environment, seriously endanger personal safety. No matter how big or large the oil spill is, it poses safety risks, environmental risks and raw material contamination risks. Leaks are also likely to cause legal problems (OSHA, EPA, FDA, USDA).

● Oil absorbent pad can quickly absorb its weight dozens of times the oil, organic solvents, hydrocarbons, vegetable oil and other liquids, and not water absorption. Widely used in water surface oil slick removal, machinery and equipment grease wipe.

● Oil absorbent pad can be used in storage battery, belly, precipitation tank and a large number of oil pollution removal, wipe, sea oil recovery treatment, oil tanker, tank, tank, etc. to prevent the spread of oil leakage, etc.

Why are there so many cheap oil absorbers pad on the market?

1. Oil-absorbing pad products produced by Hopetopway use 100% pure polypropylene as raw materials. In order to reduce product costs, many factories in the market add a certain proportion of calcium carbonate in the production process.

2. The oil absorption pad with calcium carbonate added will have a much lower oil absorption capacity than the oil absorption mat produced by 100% polypropylene pure material, which will increase the cost of the final customer.