What do oil spills cause？

作者：

 Engine oil leakage is the main harm is the loss of oil, resulting in waste, serious may lead to oil shortage and lead to engine damage. If there are more oil stains on the ground foundation of the transformer, it may also become a hidden danger of fire. Oil leakage will seriously interfere with the operation and maintenance personnel to monitor and judge the sealing condition in the transformer oil storage tank and the correctness of the oil level indicator. After the oil level is reduced due to leakage, the live connector and switch may run under the condition of no oil insulation, which may lead to breakdown, short circuit, burning loss, and even cause equipment explosion. After the oil leakage of the transformer, it will make the fully sealed transformer lose the sealing state, easy to make the oil-paper insulation suffer from the invasion of air and moisture from the outside and reduce the insulation performance, accelerate the aging of insulation, and affect the safe and reliable operation of the transformer. Hopetopway oil-absorbing pad is made of lipophilic superfine fiber nonwoven fabric, without chemical agents, will never cause two public hazards, to deal with a small range of oil leakage, can rapidly absorb its weight dozens of times the oil, organic solvents, hydrocarbons, vegetable oil and other liquids. Oil absorbent pad can be recycled, so compared to other oil treatment products, oil absorbent mat environmental protection is better.

Here is the contene list:

●What kinds of oil absorbent pad?

●How does oil absorbent pad compare with general absorbents?

●How to use oil absorbent pad?

What kinds of oil absorbent pad?

1. Oil absorption mat: can be used to wipe, small area bedding on the oil spill surface.

2. Oil suction rool: can be cut into various special shapes as required. It can cover a large area and pave a small area

3. Oil absorption pillow: used for long time dripping and absorption of oil spill at sea, easy to squeeze dry, suitable for occasions requiring more than oil absorption.

4. Oil absorbent boom: used as ground anti-diffusion containment, around the bottom of the equipment to prevent leakage at the source.

How does oil absorbent pad compare with general absorbents?

△Adsorbent is the key to deal with oil chemical leakage. Sorbents used for oil chemical spill treatment are usually divided into three categories

Category: the first category is inorganic adsorbent, such as granular soil, sand, silica, vermiculite, calcium silicate, silica gel, activity

Alumina, molecular sieve, natural clay, etc. The second category is organic adsorbent, such as rice husk, sawdust, cotton, rags, straw,

Corn cob fragments, bran, wheat germ powder, defatted corn germ powder, grains with strong water absorption, etc. The third type of polypropylene suction

Cotton, oil absorbent or chemical absorbent pad. Compared with oil-absorbing mat:

Low absorption rate: absorption 1~2 times.

Low absorption rate: takes several hours and requires a lot of manpower to clean up.

Absorption selectivity: good for oil adsorption, but poor for paint absorption.

△Oil absorber pad is made of a kind of polypropylene fiber material. Comparison with adsorbents:

High absorption rate: 20~25 times of its own weight.

Fast absorption: calculated in minutes.

Low adsorption selectivity: oil, organic solvents, hydrocarbons, vegetable oil and other liquids have a good adsorption effect. Clean-up costs are low, saving money and time.

How to use oil absorbent pad?

1. When using oil-absorbing pad, it is recommended to put oil-absorbing pad directly on the oil spill, and then put it into the place where the oil spill is much. Oil absorbent pad should be put in appropriate amount, so that the oil absorbent mat is saturated with oil. After the oil absorption of oil absorb pads reaches saturation, it should be pulled out of the water as soon as possible to avoid staying in the water for a long time.

2. When using oil-absorbing pad, we can not use oil spill dispersant at the same time, otherwise it will reduce the oil-absorbing effect of oil-absorbing pad.

3. When using oil-absorbing pad on the surface of the lake and sea, it can be used according to the amount of oil spilled, sea conditions and weather, flow rate and flow direction and other factors. A small amount of oil sorbent pad can be manually caught by boat. When the amount of oil absorbent pad is large, it can be recycled by the operation ship with a net bag.

Contact Us

Suzhou Hopetopway New Material Co., Ltd. has been engaged in safetyprot products for many years. Hopetopway has a strong R&D team. Hopetopway also has modern factories with multiple production lines. And a large number of meticulous quality control personnel. Provide global customers with high-quality safetyprot products. Our goal is: Safetyprot Is Hopetopway.

●Contact: Roy Yu

●Mobile number: 086 159 0068 2043

●Tel: 86 0512 6679 1900

●Email: roy.yu@nonwoven86.com

●Website: https://www.nonwoven86.com/

Location: 中国江苏省苏州市

评论

发表评论

此博客中的热门博文

How do oil spills affect the atmosphere？

作者：
  The main reason why oil causes serious pollution to the environment is that oil is composed of a variety of organic compounds, including four main components: 1. Saturated alkanes 2. Aromatic hydrocarbons 3. Asphaltenes 4. Colloid. The oil film formed on the sea surface can hinder the gas exchange between the atmosphere and seawater, and affect the absorption, transmission and reflection of electromagnetic radiation on the sea surface. Oil film covered in polar ice for a long time, can enhance the capacity of ice endothermic, accelerate the melting of the ice, on global sea level change and the potential impact of climate change for a long time these toxic substances not easily degraded in the soil, because the oil viscosity, it can stick on the plant roots, blocking the plant root respiration resulting in plant decay until they die. Hopetopway oil absorbent pad is made of a kind of polypropylene fiber material. Oil absorbent mat does not contain any chemical components.   O...
Read more »

How to oil spills happen？

作者：
  1. The safety of oil pipelines is not high. There are several factors causing the low safety of oil pipelines: (1) - In order to reduce construction costs and maximize economic benefits, some pipeline construction units do not invest enough in construction, installation and safety measures, which directly affects the quality of the pipeline itself and the use of steel pipes in line with national standards. From time to time, materials are stolen, and the amount of safety: (2) In order to pursue high profits, some construction units have weak awareness and low sense of responsibility in the installation process, and are unwilling to spend more money to improve the safety of the pipeline. 2. The safety management mechanism is not perfect. Most petroleum enterprises are national leading enterprises, and their monopoly position in the market is obvious. The management personnel do not have a high level of business technology, and do not pay enough attention to some security risks. In...
Read more »

What is oil spill management？

作者：
  In case of oil spill, the oil spill shall be controlled with an oil containment boom to prevent its diffusion. The oil containment boom can also guide the spilled oil to a suitable area to concentrate it as much as possible, providing conditions for the recovery of spilled oil by physical methods. ① First put the float and towing rope of the towing head into the water, and then put down the oil containment boom with the power station. At the same time, manually drag the oil containment boom, put the oil containment boom section of one or two gas chambers filled into the water, and lay the oil containment boom section of one or two gas chambers not inflated on the deck. ② On one side of the oil boom air chamber, insert the hook of the oil boom valve cover wrench into the hole of the chain plate, and hold the wrench to drag the oil boom; On one side of the counterweight chain of the oil boom, the operator can hold the chain and drag the oil boom. ③ When there is a certain length of...
Read more »

How to clean up chemical spills in the lab？

作者：
 In case of leakage and dumping of liquid chemical reagents in the laboratory, the laboratory personnel should clean up the leaked chemical liquid as quickly as possible. At this time, the most convenient method is to use  chemical absorbent pad  to adsorb the leaked liquid chemicals. In order to meet this demand, the performance requirements of chemical absorbent pads are. Firstly, the adsorption effect of chemical absorbent pad must be absorbed quickly, and secondly, chemical absorbent pads must be corrosion-resistant. Finally, chemical absorbent pad does not produce secondary overflow in the adsorption process, which requires that the adsorption capacity of chemical absorbent mat must be large. At the same time, when dealing with the leakage of chemical liquid, operators should pay attention to their own safety and do a good job in relevant protection. After handling the chemical liquid leakage accident, the used chemical absorbent mats shall be handled in time accordi...
Read more »

What can clean up oil spills？

作者：
  What can clean up an oil spill? Hopetopway oil-absorbing pad is introduced here. Oil-absorbing pad is a kind of inert chemical polypropylene made by melt-blown process. Oil absorbent pad can effectively absorb liquid and retain it. The products absorbed by oil absorbent pad are wrapped in surface treated polypropylene fibers or non-woven fabrics. Oil-absorbing pad outer cloth is extremely tough and durable with strong absorbability.   Oil absorbent pad   can effectively absorb the leaking liquid and prevent the spread of the leakage. The absorbent pad can be reused after extrusion and can recover 72% to 90% of the leaking fluid (depending on the manufacturing process and quality of the absorbent mat). Oil absorbent pad has the advantages of flame retardant, no dust, no storage limit time. Here is the contene list: ● Other related products of oil-absorbing pad. ● Oil absorption pad manufacturing process. ● Oil absorbent pad is widely used in the following situations. Oth...
Read more »

How do oil spills affect the atmosphere？

作者：
  Universal absorbent pad   can absorb oil and water after dehydration and deoiling and adding surfactant. It can be used in mechanical maintenance, automobile maintenance and oil-water treatment in factory workshops. Suitable for oil, water, coolant, solvent, pigment, dye and other unknown liquids. Hazardous chemicals, etc. universal absorbent pad is usually gray. It has strong adsorption capacity, non-toxic and eco-friendly products. It can be burned after use, and there is no harmful and toxic gas. Hopetopway universal absorbent pad is made of polypropylene fiber material. Universal absorbent mat does not contain any chemical components. Universal absorbent pad will not cause secondary pollution to the environment. It has quite strong oil absorption and liquid absorption performance, and can quickly absorb liquid. The weight of the liquid attached to the universal absorbent pad is more than ten times its own weight. Here is the contene list: ● Service characteristics of uni...
Read more »

what is used to absorb oil spills

作者：
  oil absorbing pads   is a kind of fiber and non-woven fabric made of inert polypropylene melt blown. It is made after special treatment, which can effectively absorb and retain the liquid. Adsorption products are wrapped in polypropylene fibers or non-woven fabrics sewn with thread and treated with surface activator. The outer cloth is tough and durable, and has the adsorption brought by strong capillary absorption, so as to absorb the leakage liquid to flow to the oil absorbent cotton, effectively preventing the diffusion of leakage. The products can be reused after being twisted and extruded, and 72% - 90% of the leakage liquid can be recovered (depending on the manufacturing process and quality of oil absorbent cotton). This material has the advantages of flame retardancy, no dust generation, no storage limit time, etc. Therefore, the  oil absorber pads   is the best way to absorb oil leakage. Here is the contene list: l how to use oil absorbing pads. l Applicat...
Read more »

What are oil absorbent pads made of？

作者：
  Oil-absorbing pad   is a kind of inert chemical polypropylene made by melt-blown process. Oil absorber pad can effectively absorb liquid and retain it. The products absorbed by oil absorbent pad are wrapped in surface treated polypropylene fibers or non-woven fabrics. Oil-absorbing mat outer cloth is extremely tough and durable with strong absorbability. Oil absorbent mat can effectively absorb the leaking liquid and prevent the spread of the leakage. The absorbent pads can be reused after extrusion and can recover 72% to 90% of the leaking fluid (depending on the manufacturing process and quality of the absorbent cotton). Oil absorbent pad has the advantages of flame retardant, no dust, no storage limit time. Hopetopway for many years, is a professional r &d and production of oil absorption of pad factory in China, it has served customers from all over the world, can provide OEM/ODM services, the specific contact information at the end of this article, our website is: H...
Read more »

How to deal with the leakage of dangerous chemicals?

作者：
  Emergency treatment measures During the production, storage and use of chemicals, containers containing chemicals often have accidents such as accidental rupture and spillage, resulting in the leakage of hazardous chemicals. Whether chemical storage containers or reagent bottles used in laboratories, factory batteries, etc., will leak due to long-term use, or leak due to damage, or spill and splash during the process of sub-packaging, which will pollute the working environment, Impacts on cleaner production. If these chemical spills are not treated or prevented in time, they will pollute the water or soil, not only causing a bad impact on the environment, but also seriously endangering the safety of people's lives and property. Therefore, it is necessary to take simple and effective safety technical measures to eliminate or reduce the risk of leakage. The following describes the emergency measures that must be taken for chemical leakage. · Evacuation and isolation In case of any ...
Read more »

How do you use a chemical spill kit？

作者：
 Take the  Hopetopway Chemical Spill Kit . The chemical spill kit consists of socks, gaskets, pillows and goggles, gloves, and a chemical trash can. The chemical spill kit is contained in a convenient zippered storage bag for easy transportation to and from the spill area and is compact enough to be stored in a van or behind the driver's seat if required. Chemical absorbent cotton is suitable for small areas of chemical liquid leakage, directly covering the liquid. For large area or multi-capacity leakage, adsorption cotton can be used to delineate the leakage range and gradually reduce the leakage range. According to the actual leakage area, the appropriate length of adsorption sliver should be selected, and the contact points at both ends of the sliver should be overlapped to form a strong barrier for leakage. Absorbent cotton pillow is used alone or with absorbent cotton sliver. When used, the operator can directly put the adsorption cotton pillow on a larger area (or has b...
Read more »